The air-con filter is probably the most important air conditioning parts in the air conditioning system. Without it, your air-con system would be dirty and the air you breathe will be filled with pollutants. All air-con parts, from the ductwork to the air conditioning refrigerant, need the air conditioning filter to be clean and replaced to ensure you’re getting the most effective in central air conditioning.
If an air conditioning filter is left dirty, as time passes, it can lead to higher energy costs and short
equipment life due to all of the air conditioning parts relying on each other. One can not work minus the other. Overall, your heating and cooling will not be as effective and you may need to spend money on more air-con repair and air-con maintenance.
An air conditioning filter ought to be changed on a monthly basis or every 8 weeks for home air-con systems and every little while for several commercial or industrial air-con since it’s running almost round the clock, 7 days a week. Doing this as a routine in your monthly chores rather than waiting until you see dust matted on the air conditioning filter will ensure you and your family the very best health in addition to a smooth running air conditioning system . Dust particles cannot always be seen so even if you see a little dust on the air filter , clean it as you normally would.
Since there are a variety of air-con filters , how quickly one gets blocked versus another depends on the brand – most air-con filters are sized 1 ï¿½ to 2 square feet for each ton of capacity for a house or commercial property.
You can judge a filter’s ability to clean by using MERV ratings – Minimum Efficiency Reporting Value – which is a rating of how efficient an air-con filter is from 1-12. The higher the rating, the far better it is at removing particles such as for example animal dander, pollen, dust, mold along with other allergens, and the higher the protection for your air-con equipment . Most air conditioning filters screen out particles measuring from 3 to 10 microns in proportions.
The common types of air-con filters are:
Conventional fiberglass disposable filters (1″ and 2″): They are common generally in most homes and small industrial ac units and commercial air-con systems. Since they are disposable and also have an adhesive coating that traps the dust, you should not clean the filters . This may damage the filter’s capability to remove particles by damaging the adhesive coating and/or the underlying mesh work. They’re both much less effective as other styles of filters even though they are lower in cost.
Pleated fiberglass disposable filters (1″ and 2″): The 1″ are generally found in many residential and commercial settings and are made of materials that can vary in the effectiveness. Usually, they are more densely woven to increase the efficiency of removing dirt. These have a larger surface area to lead to increased trapping of particles compared to conventional filters. They must be specified for your air conditioning system or this can result in increased demand on your air-con components.
Thereby, a mismatch can be counterproductive on the health of the air conditioning system and perhaps lead to higher air conditioning maintenance and service cost. You need to check with the air-con manufacturer as to the appropriate type of pleated filter for the system. A filter spray may also be applied after the cleaning and drying of the air conditioning air filter .
Electrostatic filters: Different in design and performance, since there are so many varieties, it is extremely difficult to determine which is the most efficient. They’re commonly advertised as allergy-free air-con filters. These filters are also available in the 1″ and 2″ sizes. Air that moves through the filter creates a static charge that collects any dust in the filter. They could require more cleaning and much more blower power.
Electronic filters : Connected to a power power source and usually wall mounted, electronic filters come with a pre-filter that may collect larger particles and only have to be cleaned every six months.
Carbon filters : These filters contain carbon that may control any odor problems you might have within the air conditioning system . ac repair near me are able to also be useful in homes with pets.
Air Conditioning Filter Installation
When placing the appropriate air-con filter into the system, the filter ought to be placed in the right direction as indicated by the arrow on the side or face of the filter. Air should flow in the proper direction which is in the same direction as the arrows. This enables the filter to work appropriately, because the air exits the filter in probably the most reinforced portion of the filter.
The air conditioning filter should fit tightly. A perfect seal is necessary to avoid unfiltered air from entering and damaging your air conditioning system. With out a perfect seal and appropriate sizing, the filter is useless. Additionally, the non-conventional filters could have a higher efficiency and could not fit your system. This should be checked with an air conditioning company, contractor, or air-con supply company.